How to clean eyebrow brush
STEP1: Use makeup remover or brush cleaning liquid to pour into the powder cover, about a thin layer of completely covered weight, let the bristles take up the adsorption, slightly dissolve the attached makeup.
STEP2: Pour the shampoo of natural ingredients in the basin and mix it up to foam, and then fully mix the bristles in the bubble water.
STEP3: Hold the bristles in the palm of your hand, and repeat the grasping and releasing techniques, so that the residual dirt and makeup in the bristles are completely cleaned out.
STEP4: At the end of the brush, which is also the part that most often touches makeup, clean it again carefully.
STEP5: Finally, wash the brush with plenty of water, and use a clean water basin to completely remove the residual detergent in the brush.
STEP6: If the brush becomes too astringent due to the use of detergent, you can use a small amount of conditioner to smooth out the hair ends, and also clean it with plenty of water.
STEP7: Take a few paper towels or a towel with good water absorption, cover the bristles and press it several times to make the moisture as dry as possible, and then lay it flat in a ventilated place and dry it.